BMW C400GT - Rider's Manual > General settings in the multifunction display
Adjusting the brightness of the backlighting for the instrument cluster
Requirement
The Scooter is stationary.
- Switch on the ignition.
- Selecting SETUP.
- Briefly press the top of the MENU rocker button repeatedly until SETUP BRIGHT is displayed.
- Briefly press the bottom of the MENU rocker button 2 repeatedly until the desired brightness of the backlighting is adjusted.
- Press and hold the top of the MENU rocker button 1 to exit SETUP.
SETUP ENTER is displayed.
Setting the units
Requirement
The Scooter is stationary.
- Switch on the ignition.
- Selecting SETUP.
- Briefly press the top of the MENU rocker button repeatedly until SETUP UNIT ENTER is displayed.
- Press and hold the bottom of the MENU rocker button to activate SETUP
UNIT.
SETUP UNIT SPEED is displayed.
- Briefly press the top of the MENU rocker button 1 repeatedly to select
the following parameters in SETUP UNIT:
- Change the speedometer unit, KMH or MPH
- Change the odometer unit, KM or MI
- Reset the units of the speedometer and odometer to the factory setting.
- Briefly press the bottom of the MENU rocker button 2 repeatedly until the desired unit 3 of the speedometer or the odometer is set.
- To exit the setting, briefly press the top of the MENU rocker button 1 repeatedly until SETUP UNIT EXIT is displayed.
- Press and hold the bottom of the MENU rocker button 2 to exit SETUP
UNIT.
SETUP RESET is displayed.
- To reset the units to the factory setting, briefly press the top of the MENU rocker button 1 repeatedly until SETUP UNIT RESET is displayed.
- Press and hold the bottom of the MENU rocker button 2 until the RESET 3
display flashes.
The units have been reset to the factory setting.
SETUP UNIT EXIT is displayed.
- Press and hold the bottom of the MENU rocker button 2 to exit SETUP
UNIT.
SETUP RESET is displayed.
Resetting SETUP
- Switch on the ignition.
- Selecting SETUP.
- Briefly press the top of the MENU rocker button repeatedly until SETUP RESET is displayed.
- Press and hold the bottom of the MENU rocker button 2 until SETUP 3 is reset.
NOTICE The SETUP RESET function also resets the date and time to their standard values.
The time 12:00 is displayed.
- Press and hold the top of the MENU rocker button 1 to exit SETUP.
SETUP ENTER is displayed.
Heated grips
- with heated grips OE
Operating heated grips
- Start engine.
NOTICE The heated grips option can only be activated when the engine is running.
- Repeatedly press button 1 until the desired heating level appears in the display.
The grips have three-level heating.
The third level is used for heating of the grips quickly. It is advisable to switch back to the second or first level as soon as the grips are warm. The following displays are available:
100 % heating output
Approx. 60 % heater output
Approx. 30 % heater output
- with Connectivity OE
- Repeatedly press button 1 until the desired heating level appears in the display.
The grips have three-level heating.
The third level is used for fast heating of the grips; the switch should then be switched back to the second or first level.
The following displays are available:
100 % heating output
Approx. 60 % heater output
Approx. 30 % heater output
See also:
BMW C400GT - Rider's Manual > Time and date
Set clock Requirement The Scooter is stationary. Switch on the ignition. Selecting SETUP. SETUP CLOCK is displayed. Press and hold the bottom of the MENU rocker button to set the hours.
BMW C400GT - Rider's Manual > Seat heating
with seat heating OE Operating the rider's seat heating Start engine. NOTICE Seat heating can be activated only when the engine is running. Repeatedly press button 1 until the desired heating level appears in the display.
