BMW C400GT - Rider's Manual > SETUP

Selecting SETUP

Requirement

The Scooter is stationary.

• Briefly press the top of the MENU rocker button 1 repeatedly until SETUP ENTER 3 is displayed.
• Press and hold the top of the MENU rocker button 1 to start SETUP.

  SETUP ASC is displayed.

• Briefly press the top of the MENU rocker button 1 repeatedly to select the following parameters in SETUP:

• Switch ASC off or on ASC OFF/ ASC ON or calibrate ASC ASC CAL
• with anti-theft alarm system (DWA) OE
• Automatically activate the alarm function of the anti-theft alarm system after switching off the ignition DWA ON or leave deactivated DWA OFF.

 

• Set time display CLOCK.
• Set date DATE.
• Adjust the brightness of the backlighting for the instrument cluster BRIGHT.
• Adjust the units UNIT.
• Reset the displays RESET.
• Exit SETUP EXIT.

Exiting SETUP

Requirement

There are 4 ways to exit SETUP.

• Press and hold the top of the MENU rocker button 1.

  SETUP ENTER is displayed.

• Alternative: Briefly press the top of the MENU rocker button 1 repeatedly until SETUP EXIT is displayed.
• Press and hold the bottom of the MENU rocker button 2.

  SETUP ENTER is displayed.

• Alternative: turn the ignition off and on again.

  SETUP ENTER is displayed.

• Alternative: Ride off.

When the permissible speed for operation is exceeded, SETUP is exited.

ODO is displayed.

All settings are stored, regardless of how SETUP is exited.

See also: