Kawasaki J300 - Service manual > Fuel Injector (Service Code 33)

Fuel System (DFI) / Fuel Injector (Service Code 33)

See also:

 Kawasaki J300 - Service manual > Oxygen Sensor - not activated (Service Code 17, Equipped Models)

Oxygen Sensor Removal/Installation Refer to the Oxygen Sensor Removal/Installation in the Electrical System chapter. Oxygen Sensor Inspection Remove: Storage Box (see Storage Box Removal in the Frame chapter) Oxygen Sensor Lead Connector [A] Connect the measuring adapter [A] between the harness connector and oxygen sensor lead connector.

 Kawasaki J300 - Service manual > Fuel Injector Removal

WARNING Gasoline is extremely flammable and can be explosive under certain conditions, creating the potential for serious burns. Make sure the area is well ventilated and free from any source of flame or sparks; this includes any appliance with a pilot light. Do not smoke. Turn the ignition switch off. Be prepared for fuel spillage; any spilled fuel must be completely wiped up immediately.