Kymco XCITING 500 - Service Manual > Luggage box
REMOVAL
Remove the seat.
Remove the four screws and three nuts.
Raise the luggage box, disconnect the luggage box light and accessory socket connectors.
INSTALLATION
Installation is in the reverse order of removal.
SPARK PLUG MAINTENANCE LID
REMOVAL
Remove the bolt and lid.
INSTALLATION
Installation is in the reverse order of removal.
REAR SPOILER
REMOVAL
Unlock the seat with the ignition key.
Open the seat.
Remove the rubber cap.
Remove four bolts and rear spoiler.
INSTALLATION
Installation is in the reverse order of removal.
FRONT FENDER
REMOVAL
Remove the six bolts and front fender.
INSTALLATION
Installation is in the reverse order of removal.
UPPER HANDLEBAR COVER
REMOVAL
Remove four screws and upper handlebar cover.
INSTALLATION
Installation is in the reverse order of removal.
RIGHT/LEFT CENTER BODY COVER
REMOVAL
Remove the two bolts and right/left center body cover.
Be careful not to damage the tabs on the center body cover.
INSTALLATION
Installation is in the reverse order of removal.
RIGHT/LEFT FLOOR SKIRT
REMOVAL
Remove the floor mat.
Remove the center body cover.
Remove the seven screws.
Remove two screws.
Remove the floor skirt.
Be careful not to damage the tabs on the floor skirt.
INSTALLATION
Installation is in the reverse order of removal.
See also:
Kymco XCITING 500 - Service Manual > Frame covers removal
SEAT REMOVAL Unlock the seat with the ignition key. Open the seat. Remove the two nuts and seat damper unit. Remove the two nuts and the seat.
Kymco XCITING 500 - Service Manual > Floorboard
REMOVAL Remove right and left center body cover. Remove the right and left floor skirt. Remove the luggage box. Remove six bolts, four screws and floorboard.
