Kymco Xciting 250i - Owner's Manual > Fuel filler cap
To open the fuel filler cap:
Insert the ignition key in the ignition switch and turn it to the ""position (the key cannot be removed in this position).
Rotate the key clockwise to the "" position, and the fuel filler cap 1 will open.
After refueling, be sure to close the filler cap securely.
Do not overfill the tank. There should be no fuel in the filler neck 2. Excess fuel can contaminate the evaporative emission canister, resulting in poor drivability.
Fuel recommendation
Use unleaded gasoline with a research octane number of 91 or higher. Unleaded gasoline will extend spark plug and exhaust component life.
Gasoline is highly flammable and explosive. You can be burned or seriously injured while handling fuel.
- Stop the engine and keep heat, sparks, and flame away.
- Refuel only out doors.
- Clean up fuel spills immediately.
To lock the fuel filler cap: Push fuel fill cap down into place.
Turn the ignition key from the "" position to the "" position to restart the engine.
Front glove box
To open:
Insert the ignition key into the glove box lock 3 and turn it clockwise.
To close:
1. Hold the glove box lid 4 closed and turn the ignition key counterclockwise.
2. Remove the key.
Opening the glove box lid while riding can be hazardous.
Removing a hand from the handlebars can reduce your ability to control the scooter.
Always keep both hands on the handlebars while riding the scooter.
Center storage box
To open the box:
Pull up the release lever 6 of the storage box cover 5.
To close and secure the box cover:
Push down on the box cover until it locks.
Opening the center storage box lid while riding can be hazardous. Removing a hand from the handlebars can reduce your ability to control the scooter.
Always keep both hands on the handlebars while riding the scooter.
See also:
Kymco Xciting 250i - Owner's Manual > Brakes
Combination brake lever (left handlebar) Apply the front and rear brakes squeezing the left hand brake lever gently towards the grip. The brake light will illuminate when the lever is squeezed.
Kymco Xciting 250i - Owner's Manual > Seat
To unlock the seat "": With the ignition key at the "" position (the engine is running), push the key in and turn it counterclockwise from "" to the "" position. With the ignition key in the "" position (the engine is not running), turn the counterclockwise from the "" to the "" position. With the ignition key in the "" position (the steering is locked), turn the key counterclockwise from the "" position to the "" position.