Peugeot Satelis - Service manual > Location of body components

1. Upper handlebar cover.
2. Front top cover panel.
3. Rider saddle.
4. Lower handlebar cover.
5. Wind protector.
6. Tank streamlining.
7. Counter panel.
8. Front shield panels.
9. Bottom panel.
10. Footboard.
11. Rear shield.
12. Front mudguard.
13. Mudguard.
14. Rear cover.
15. Side panels.
16. Mudflap.
17. Passenger backseat.
18. Helmet compartment.

Body component sequence of disassembly

* This item may be removed on its own.

Removal of the rider's saddle

Removal of the passenger's saddle

Procedure 1.

• Open the saddle cover storage compartment.
• Remove:
  • The screw.
  • The saddle cover.
  • The rider's saddle.

• Open the passenger's saddle.
• Remove:
  • The 2 upper pivot clips.
  • The 2 pivot pins.

• Flip up the seat to the front of the vehicle.
• Remove:
  • The 2 lower pivot clips.
  • The 2 pivot pins.
• Remove the passenger seat.

Removal of a RH or LH grab handle

Procedure 2.

• Remove the grab handle trim.
• Remove the 2 nuts and the screw that secure the handle.
• Remove the grab handle.

Removal of a RH or LH taillight

Removal of a taillight bulb

• Remove the grab handle. See: Procedure 2.
• Remove the taillight. (1 screw).

• Remove the 4 screws from the taillight unit.
• Separate the 2 parts in order to reach the bulbs.

Removal of a RH or LH side cover

Procedure 3.

• Remove:
  • The rider's saddle. See: Procedure 1.
  • The grab handles. See: Procedure 2.
• Remove the rear cover and its trim. (4 screw).

• Remove the 2 screws that secure the side cover linkage and the footboard.

• Push aside the footboard in order to clear the side cover holder eyelet.
• Remove the side cover.
• Disconnect the taillight.

See also: