Kymco XCITING 500 - Service Manual > Tailight/rear turn signal light
REMOVAL
Remove the side and rear body cover.
Remove eight screw and taillight/rear turn signal light.
INSTALLATION
Installation is in the reverse order of removal.
REAR LOWER COVER
REMOVAL
Remove the side body cover.
Remove the rear lower cover.
REARVIEW MIRROR
REMOVAL
Remove bolts lid.
Remove three bolts and rearview mirror.
Remove the two bolts, rearview mirror holder and seat.
INSTALLATION
Installation is in the reverse order of removal
WINDSHIELD
REMOVAL
Remove four screws and windshield garnish.
Remove four bolts and windshield.
Be careful not to scratch or damage the windshield surface.
INSTALLATION
Installation is in the reverse order of removal.
FRONT COVER
REMOVAL
Remove the rearview mirrors.
Remove six screws.
Remove two screws.
Remove one screw.
Disconnect headlight and turn signal light connectors.
INSTALLATION
Installation is in the reverse order of removal.
See also:
Kymco XCITING 500 - Service Manual > Floorboard
REMOVAL Remove right and left center body cover. Remove the right and left floor skirt. Remove the luggage box. Remove six bolts, four screws and floorboard.
Kymco XCITING 500 - Service Manual > Headlight
REMOVAL Remove the front cover. Remove six screws and headlight. INSTALLATION Installation is in the reverse order of removal.
