Kawasaki J300 - Service manual > Engine Top End
Exploded View
G: Apply grease.
L: Apply a non-permanent locking agent.
M: Apply molybdenum disulfide grease.
MO: Apply molybdenum disulfide oil solution.
(mixture of the engine oil and molybdenum disulfide grease in a weight ratio
10:1)
R: Replacement Parts
S: Follow the specified tightening sequence.
Exploded View
R: Replacement Parts
S: Follow the specified tightening sequence.
Specifications
Special Tools and Sealant
Compression Gauge, 20 kgf/cm²: 57001-221
Valve Seat Cutter, 60º -
30: 57001-1123
Valve Spring Compressor Assembly: 57001-241
Valve Seat Cutter Holder Bar: 57001-1128
Valve Seat Cutter, 45º -
24.5: 57001-1113
Valve Seat Cutter, 45º -
30: 57001-1187
Valve Seat Cutter, 32º -
25: 57001-1118
Valve Spring Compressor Adapter,
22: 57001-1202
Valve Seat Cutter, 32º -
30: 57001-1120
Valve Seat Cutter Holder,
5: 57001-1208
Compression Gauge Adapter, M10 × 1.0: 57001-1317
Valve Seat Cutter, 60º -
25: 57001-1328
Liquid Gasket, TB1216: 92104-1063
- Cylinder Head Cover, Camshaft Chain Tensioner
- Camshaft
- Rocker Arm, Rocker Shaft
- Cylinder Head
- Valves
- Cylinder, Piston
- Intake Manifold, Muffler
See also:
Kawasaki J300 - Service manual > Thermostat
Thermostat Removal Drain the coolant (see Coolant Change in the Periodic Maintenance chapter). Remove the storage box (see Storage Box Removal in the Frame chapter) Loosen the water hose clamp screw [A]. Disconnect the water hose [B]. Remove: Thermostat Housing Cover Bolts [C] Thermostat Housing Cover [D] Thermostat
Kawasaki J300 - Service manual > Cylinder Head Cover, Camshaft Chain Tensioner
Cylinder Head Cover Cylinder Head Cover Removal Remove the storage box (see Storage Box Removal in the Frame chapter). Open the clamp and disconnect the breather hose [A]. Loosen the bolt and remove the fuel hose bracket [B]. Remove: Cylinder Head Cover Bolts [C] Cylinder Head Cover [D] Cylinder Head Cover Gasket
